Two Lions Electric Call
A Two Lions electrician on a ladder working at a commercial ceiling grid.

Services

Electrical Troubleshooting in North Vancouver

A breaker that will not stay closed, a dead circuit, a switch that buzzes, a burning smell.

Price
$150–$300 call-out, then $95–$175/hr
Google rating
5.0
Service in
English

Fault-finding on flickering lights, tripping breakers, dead outlets and legacy wiring, usually same day.

What people worry about, and how the call actually goes

  • 01

    The look

    When nobody picks up

  • 02

    The number

    When a part gets swapped and nothing gets explained

  • 03

    The permit

    When the bill is the first number you hear

What to check, and what to ask

General guidance for homeowners, not specific to your system — worth knowing before you book anyone, including us.

  1. Write down what changed, and when

    A new appliance, a wet week, a renovation, a fixture someone swapped. Intermittent faults are found by their pattern far more often than by testing, and you hold the pattern.

  2. Lights dimming briefly and lights flickering all over the house are not the same

    A small dip when a large motor starts is ordinary. Flickering across unrelated circuits, or lights that brighten and dim together, is worth a call rather than a wait.

  3. A breaker that trips repeatedly is doing its job

    It is protecting the wiring from something. The question worth asking is what is drawing more than the circuit is rated for, or where the fault is — never how to make it hold.

  4. If your house was wired before the mid-seventies, say so on the phone

    Knob-and-tube and aluminium branch wiring both need particular handling and are both still in Lower Mainland houses. Mention it when you book; insurers commonly ask about it too.

Try these first

  1. 1. Work out how much of the house is affected

    One outlet, one room, one floor, or everything. Walk it and note the edges. Where the dead area stops is the single most useful thing you can tell an electrician.

  2. 2. Look for a tripped breaker, and reset it once

    A tripped breaker often sits between on and off rather than fully off. Push it firmly off, then on — once. If it trips again, leave it off and stop there.

  3. 3. Press RESET on every GFCI you can find

    The outlets with TEST and RESET buttons, in bathrooms, the garage, the kitchen and outside. One of them may be feeding the dead area from another room. Press the button only.

  4. 4. Unplug everything on that circuit, then reset once more

    A single failing appliance trips a circuit that is otherwise fine. With everything unplugged, reset once, then plug items back one at a time. Whichever one trips it is your answer.

  5. 5. Write down what changed recently

    New appliance, recent rain, renovation work, a light someone replaced. Note the times of day it happens too. Intermittent faults are caught by their pattern.

A Two Lions electrician on a step ladder in a kitchen mid-renovation, setting a pendant fixture — their own photograph.
Two Lions's own photo, from a job in North Vancouver.

Before you call

What does a diagnostic visit cost?
Metro Vancouver electricians generally charge a $150 to $300 call-out that includes the first hour, then $95 to $175 an hour after it, with an after-hours premium on top. Two Lions' estimates are free, but an estimate and a diagnosis are different things: quoting a panel upgrade is free, and tracing an intermittent fault through a house is time on the tools and is billed. You should be told which one you are buying before anyone starts.
How fast can someone actually come?
Their own site says same-day is usual for urgent residential faults, that commercial emergency calls are often dispatched within the hour, and that they take urgent calls 24/7. The practical version: they are open seven to seven Monday through Saturday, which covers before-work and after-work far better than a nine-to-five shop does.
I can smell burning or I saw a spark at an outlet.
Turn the power off to that area at the panel and call. Do not wait for business hours and do not keep using the circuit. A smell of hot plastic, a scorch mark, a warm faceplate or a spark at a device are all signs of a loose or failing termination, and a loose termination is how an electrical fire starts.
My breaker keeps tripping. Can I just replace the breaker?
Almost never, and replacing it is how a real fault gets hidden. A breaker that trips is usually doing its job — an overloaded circuit, a failing appliance, a nail through a cable, or moisture in an exterior device. The work is finding which, and a breaker swap without that answer just removes the warning.
What does a free estimate actually include?
A visit, a look at the panel and the work, a load calculation where the job needs one, and a written price for the work described — no charge, no obligation. What it is not is diagnostic work. Quoting a panel upgrade or a charger install is free; tracing an intermittent fault through a house is time on the tools and is billed as a service call, and you should be told which one you are getting before anyone starts.
When are you actually open?
Monday to Saturday, seven in the morning until seven at night. Sunday closed. That is genuinely unusual in this trade and it is the reason most people end up calling — it means an electrician can be at your house before you leave for work or after you get back, without taking a day off to wait for one.

Tell Two Lions what's going on

604-245-8668

Two Lions will call you back on the number you left.

Address
6-801 1st Street West, North Vancouver, BC
Service Area
North Vancouver · West Vancouver · Vancouver · Burnaby · New Westminster · Port Moody · Coquitlam
Hours
Monday–Saturday, 7:00 am – 7:00 pm. Sunday closed.
Call Two Lions Now